i need 3 routing sheets 1 flywheel 2 cylinder 3 driveshaft

/in /by

I upload example and info file you need to do it as the example

Write 3 Routing Sheets for each subject :

Save your time - order a paper!

Get your paper written from scratch within the tight deadline. Our service is a reliable solution to all your troubles. Place an order on any task and we will take care of it. You won’t have to worry about the quality and deadlines

Order Paper Now

1-Flywheel.

2-Cylinder

not:
Cylinder
1 – cut a piece of aluminium 1.25 h and 2.50width.
2 – Install the piece of aluminum in the CNC machine.
3 – We haver a program to design the piece of aluminum.
4- The program Name 000035 .
5- I started with 3 OD GROOVE.
6- End with Face.
7- Flip the aluminum piece and we have another program to cut the extra part of it.
8-The program Name 000036.
9-We have Face to cut the extra .25 width because it is only 2.25 width what we need.
10- We take the piece of aluminium to another CNC machine to make the hole.
11- We already have a program to drill Cylinder hole.
12- The program Name 000037.
13- We start the program by making center drill by T3434 drill Bit.
14- Then machine will make sound to change the drill bit to .5 drill bit.
15- Use the T3535 bit to peck the hole.
16- We end by clean the hole from the feed.
To improve the work in future we need to train more on how to use CNC machine and how to design program.

3-

not:

Drive Shaft

1 – cut a piece of Alnimim 2 length and 1.38 width.

2 – Install the piece of aluminum in the CNC machine.

3 – We design a program to design the piece of aluminum.

4- The program Name 000033 .

5- I started with 2 OD Chamfer, 2 OD Turn, and Face the end.

6- Before saving the program we write G2B and M3O un the end.

7- Flip the aluminum piece and design another program to cut the extra part of it.

8-The program Name 000034.

9-I started with OD Chamfer,and Face the end.

In the end, To improve the work in future we need to train more on how to use CNC machine and how to design program

 
Looking for a similar assignment? Our writers will offer you original work free from plagiarism. We follow the assignment instructions to the letter and always deliver on time. Be assured of a quality paper that will raise your grade. Order now and Get a 15% Discount! Use Coupon Code "Newclient"